CEMENT & CONSTRUCTION POWDER PACKAGING
Laminated polypropylene woven block bottom valve bags for cement and compatible dry construction powders. Customize bag dimensions, internal valve specifications and printed artwork to match your product and filling process.
Internal valve · Block bottom · Custom Flexo printing · MOQ 50,000 bags
Nominal filling weights depend on powder bulk density and the selected bag specification. Product photographs show example designs; final construction follows the approved sample.
This bag combines woven polypropylene fabric, a laminated surface and an internal valve filling opening. The woven fabric forms the structural base, while the surface layer helps limit direct moisture exposure. The valve connects to a compatible filling spout.
A block bottom supports a rectangular filled profile for organized handling and pallet arrangement. Bag dimensions, fabric weight, valve fit and air release should be specified together for the actual powder and packing equipment.
Base fabric weight ranges from 58–70 g/m². Select the construction according to filling weight, bag dimensions and handling requirements.
Lamination weight ranges from 18–25 g/m². Overall moisture protection also depends on the valve, air-release features and storage conditions.
Valve dimensions can be matched to the filling spout. Confirm filling performance and powder retention using the actual material and equipment.
The block bottom helps form a rectangular filled bag. Pallet stability depends on filling consistency, bag dimensions and the stacking arrangement.
| Product Name | Laminated PP Woven Block Bottom Valve Bag |
|---|---|
| Material | Laminated polypropylene (PP) woven fabric |
| Mesh | 8 × 8, 9 × 9,10 × 10 |
| Denier | 800D-950D |
| Top Design | Valve Type, Internal valve; dimensions customized to match the filling spout |
| Bottom Design | Block bottom |
| Capacity | 20kg, 22.6kg 25kg, 30kg, 40kg, 42.5kg or 50kg, depending on product bulk density and bag specifications |
| Bag Dimensions | Customized width × length × bottom width (mm) |
| Printing | Cost-effective Felxo printing, up to 4 colors per side |
| Artwork | Customized logo and product information |
| Air Permeability | Selected according to powder characteristics and filling requirements |
| Applications | Cement, cement-based dry-mix mortar, tile adhesive powder, cementitious grout and other compatible construction powders; suitability subject to product and filling requirements |
| Packing | 400-500 bags/bale or 4,000–10,000 bags/pallet, depending on bag dimensions and packing requirements |
| Minimum Order Quantity | 50,000 bags |
PRODUCT DETAILS
Example of a printed 50kg cement bag. Logo, product information and artwork can be customized.
Confirm valve dimensions against the filling spout and evaluate the fit during a sample filling trial.
Base fabric and lamination weights are specified separately to define the required material construction.
Packing quantities and pallet arrangements are confirmed according to bag dimensions and shipping requirements.
This bag format can be evaluated for the following products. The appropriate specification depends on the formulation, powder characteristics and filling conditions.
For wall putty powder, gypsum plaster, calcium carbonate powder and limestone powder, contact us to confirm a suitable construction and sample evaluation requirements.
MORE PACKAGING OPTIONS
Compare alternative packaging structures for compatible dry powders. Click a bag below to view its construction and specifications. Final selection depends on the material, filling equipment, storage and handling requirements.
Specifications, printing options, minimum order quantities and lead times for alternative constructions are confirmed separately.
YOUR QUESTIONS, ANSWERED
It is an industrial bag made from laminated polypropylene woven fabric, with a block bottom and a valve opening for filling cement and compatible dry powders.
These bags can be specified for cement, cement-based dry-mix mortar, tile adhesive powder and cementitious grout. Other products require confirmation according to formulation, filling conditions and storage requirements.
Yes. The bag dimensions and construction are selected according to the nominal filling weight, powder bulk density, filling equipment and handling conditions.
Not necessarily. Different bulk densities result in different volumes at the same weight. Provide the product details and target weight so that suitable dimensions can be selected.
Base fabric weight is 58–70 g/m², and lamination weight is 18–25 g/m². These values describe weight per unit area, rather than the weight of one finished bag.
Yes. Dimensions are specified as width × length × bottom width in millimeters. The valve dimensions should match the filling spout. Send a sample, drawing or equipment measurements.
Compatibility depends on the filling spout, valve dimensions, handling system and powder behavior. Confirm the specification and evaluate samples on the actual filling line.
Lamination helps resist moisture exposure, but the complete bag should not be assumed to be waterproof or airtight. Valve construction, air-release features and storage affect protection. Store filled bags in dry, covered conditions.
Air release and powder retention must be balanced for the material and filling process. Assess powder fineness, filling pressure, valve fit and bag construction through a filling trial.
Yes. Offset printing is available with up to four colors per side. Send the artwork, colors and layout for review against the bag dimensions and printable areas.
The minimum order quantity is 50,000 bags. Specify any different sizes or printed designs so the order arrangement can be confirmed.
Typical packing is 400 bags per bale or 4,000–10,000 bags per pallet. Final quantities depend on bag dimensions and packing requirements.
The estimated lead time for the first container is 20 days after order confirmation, deposit receipt and final artwork approval, subject to order quantity and production availability.
Send the powder type, filling weight, bag dimensions or sample, valve dimensions, artwork, quantity and destination. Bulk density and filling equipment details help determine a suitable specification.
Test samples with the actual powder and equipment. Check filling performance, valve fit, air release, leakage, handling and stacking. Approve the final specification and artwork before bulk production.
Send Wanlin Packaging your powder details, target filling weight, bag dimensions, valve requirements, printed artwork, order quantity and delivery destination.
Minimum order: 50,000 bags
Estimated lead time: 30 days for the first container after order confirmation, deposit receipt and artwork approval, subject to the order and production schedule.
Payment terms: T/T, 30% deposit and 70% balance before shipment.